|Title:||Illini 42 Tornado|
|Other Titles:||PSLF EPC Format|
|Authors:||Birchfield, A. B.|
Gegner, K. M.
Shetye, K. S.
Overbye, T. J.
|Publisher:||Texas A&M University Engineering|
|Abstract:||Synthetic electric grid models are fictitious representations that are designed to be statistically and functionally similar to actual electric grids while containing no confidential critical energy infrastructure information (CEII). Some of these cases were developed with the support of the U.S. DOE ARPA-E Grid Data program; their support is gratefully acknowledged. A description of the initial algorithm used to develop these cases is given in: A. B. Birchfield; T. Xu; K. M. Gegner; K. S. Shetye; T. J. Overbye, “Grid Structural Characteristics as Validation Criteria for Synthetic Networks,” to appear in IEEE Transactions on Power Systems. The Illini 42 bus case models a 345/138 kV fictitious network. The scenario starts with the system in a reasonable operating condition. Then, within a minute a tornado by the Prairie Substation takes out three 345 kV transmission lines and forces a 500 MW wind farm off-line. The scenario goal is to operate the system for five minutes without a system wide blackout. The key system controls are either opening loads or opening lines. The system metric is to avoid a blackout while minimizing the total unserved energy over the five minute scenario. Beware of generators tripping due to over excitation and transmission lines tripping due to over current! Without intervention, the system will experience a blackout in about 80 seconds. The download link provides two cases with the same scenario, but with different refresh rates. Illini42 case has a refresh rate of 5 times per second, while the Illini42_Scada_Refresh_Rate case has a SCADA refresh rate of one every 6 seconds|
|Appears in Collections:||Synthetic Data for Power Grid R&D|
Items in BetterGrids are protected by copyright, with all rights reserved, unless otherwise indicated.